S-124 Flooring Adhesive Europol

Product Description
S-124 Flooring Adhesive Europol is solvent-free two component polyurethane based parquet adhesive.
Properties
S-124 Flooring Adhesive Europol resists against humidity, water and most of the chemicals. S-124 Flooring Adhesive Europol has very good filling capacity and
thixothropic properties. S-124 Flooring Adhesive Europol gives better result in fixing wooden to concrete than other kinds of adhesives.
Application Areas
S-124 Flooring Adhesive Europol is an adhesive for bonding parquet, laminate and all kinds of wood.
Technical Properties
Mixing Ratio : 6 : 1 (By weight)
Density of mixture (20°C) : app. 1,75 gr/cm³
Density of Comp. A (20°C) : app. 1,88 gr/cm³
Density of Comp. B (20°C) : app. 1,22 gr/cm³
Pot-life (23°C) : 30-40 min.
Application temperature : Min 5°C
Curing (20°C and %60 relative humidity) : 4 hours
Color and odor : Crème
Application Instructions
The resin component should be thoroughly stirred to incorporate any slight separation, whilst continuing stirring
the contents of the hardener container should be added. Continue stirring until a homogeneous mix is obtained.
The mixed material must be used within 30-40 minutes of mixing at 20ºC The surface must be dry and clean.
S-124 Flooring Adhesive Europol can be applied by trowel.
Consumption
1,75 kg is used per m² (depends on the surface absorbance)
Storage
1 year under room conditions.
Important Notes
Substrate must be dry, clean, free from dust, grease and oil. Application must be done between 5°C and 30 °C.
Cautions
Harmful if swallowed. Seek immediately medical attention. Rubber gloves and safety glasses with side guards
should be worn.
Packaging
7 kg. Pail (A+B)