S-121 Europol Flooring Adhesive

 

Product Description
S-121 Europol Flooring Adhesive is a solvent-free two component polyurethane based parquet adhesive.
Properties
S-121 Europol Flooring Adhesive resists against humidity, water and most of the chemicals. S-121 Europol Flooring has very good filling capacity
and thixothropic properties. S-121 Europol Flooring gives better result in fixing wooden to concrete than other kinds of
adhesives.
Application Areas
S-121 Europol Flooring is an adhesive for bonding parquet, laminate and all kinds of wood.
Properties
Mixing Ratio : 9 : 1 (By weight)
Density of mixture (20°C) : app. 1,90 gr/cm³
Density of Comp. A (20°C) : app. 2,10 gr/cm³
Density of Comp. B (20°C) : app. 1,22 gr/cm³
Pot-life (23°C) : 30-40 min.
Application temperature : Min 5°C
Curing (20°C and %60 relative humidity) : 4 hours
Color and odor : Crème
Application Instructions
The resin component should be thoroughly stirred to incorporate any slight separation, whilst continuing stirring
the contents of the hardener container should be added. Continue stirring until a homogeneous mix is obtained.
The mixed material must be used within 30-40 minutes of mixing at 20ºC The surface must be dry and clean.
S-121 Europol Flooring can be applied by trowel.
Consumpiton
2 kg is used per m² (depends on the surface absorbance)
Storage
1 year under room conditions.
Important Notes
Substrate must be dry, clean, free from dust, grease and oil. Application must be done between 10°C and 30 °C.
Cautions
Harmful if swallowed. Seek immediately medical attention. Rubber gloves and safety glasses with side guards
should be worn.
Packaging
10 kg. Pail (A+B)